User Tools

Site Tools


cnc_troubleshooting

CNC Troubleshooting

Mulige problemer:

  • Går computeren i sleep mode
  • GRBL version
  • Skærmet USB
  • wiring: https://github.com/grbl/grbl/issues/384 This is most likely wiring issues and electric interference on your hard limit lines, which may falsely trigger a hard limit alarm. If you turn off hard limits, this problem should go away and verify that this is causing the issue. Please look at the closed issues threads for possible solutions.
cnc_troubleshooting.txt · Last modified: 2018/09/13 23:44 by admin